Front Panel Leds; Figure 2-2 Front Panel; Table 2-2 Led Descriptions - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

2.4

Front Panel LEDs

The LEDs on the front panel indicate the operational status of the Prestige.
The following table describes the LED functions.
LED
PWR
CON/AUX
10M LAN1,2,3,4
100M LAN1,2,3,4
2-4

Figure 2-2 Front Panel

Table 2-2 LED Descriptions

FUNCTION COLOR
Power Green
Console/ Green
Auxiliary
Orange
Orange
LAN
Green
STATUS
On The Prestige is receiving power.
Off The system is not ready or failed.
Flashing The system is performing system tests.
On The port is in console mode (CON/AUX switch
set to CON) and is connected to a management
computer.
On The port is in auxiliary mode (CON/AUX switch
set to AUX), is connected to a modem or TA and
the link is up.
Flashing Data is being sent/received through the backup
modem or TA.
Off There is no connection to the CON/AUX port.
Off The 10M LAN port(s) is not connected.
On The Prestige is connected to a 10M LAN port(s).
Flashing The 10M LAN is sending/receiving packets.
Off The 100M LAN port(s) is not connected.
Hardware Installation & Initial Setup
MEANING