Other applications, for example, gaming programs are NAT unfriendly because
they embed addressing information in the data stream. These applications still
won't work through NAT even when using One-to-One and Many One-to-One
Follow the steps outlined in example 3 above to configure these two menus as follows.
Type= Many-One-to-One
Local IP:
Start= 192.168.1.10
End = 192.168.1.12
Global IP:
Start= 10.132.50.1
End = 10.132.50.3
Figure 11-23 Example 4: Menu 15.1.1.1 — Address Mapping Rule
After you've configured your rule, you should be able to check the settings in menu 15.1.1 as shown next.
NAT
Figure 11-22 NAT Example 4
mapping types.
Menu 15.1.1.1 Address Mapping Rule
Press ENTER to Confirm or ESC to Cancel:
Prestige 324 Intelligent Broadband Sharing Gateway
11-27