Log Command Example - ZyXEL Communications 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
Use the sys logs display [log category] command to show the logs in an individual ZyWALL
log category.
Use the sys logs clear command to erase all of the ZyWALL's logs.

Log Command Example

This example shows how to set the ZyWALL to record the access logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
# .time
notes
message
0|11/11/2002 15:10:12 |172.22.3.80:137
|ACCESS BLOCK
Firewall default policy: UDP(set:8)
1|11/11/2002 15:10:12 |172.21.4.17:138
|ACCESS BLOCK
Firewall default policy: UDP(set:8)
2|11/11/2002 15:10:11 |172.17.2.1
|ACCESS BLOCK
Firewall default policy: IGMP(set:8)
3|11/11/2002 15:10:11 |172.22.3.80:137
|ACCESS BLOCK
Firewall default policy: UDP(set:8)
4|11/11/2002 15:10:10 |192.168.10.1:520
|ACCESS BLOCK
Firewall default policy: UDP(set:8)
5|11/11/2002 15:10:10 |172.21.4.67:137
|ACCESS BLOCK
86
source destination
|172.22.255.255:137
|172.21.255.255:138
|224.0.1.60
|172.22.255.255:137
|192.168.10.255:520
|172.21.255.255:137
Log Descriptions