Figure 21-3 Menu 24.2: System Information And Console Port Speed - ZyXEL Communications 10 User Manual

FIELD
Cols
Tx B/s
Rx B/s
Up Time
Ethernet Address
IP Address
IP Mask
DHCP
System up Time
ZyNOS F/W
Version
You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.
21.2 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the
System Information and Console Port Speed:
Step 1.
Enter 24 to go to Menu 24 – System Maintenance.
Step 2. Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
Step 3. From this menu you have two choices as shown in the next figure:

Figure 21-3 Menu 24.2: System Information and Console Port Speed

System Information and Diagnosis
Table 21-1 System Maintenance: Status Menu Fields
The number of collisions on this port.
Shows the transmission speed in Bytes per second on this port.
Shows the reception speed in Bytes per second on this port.
Total amount of time the line has been up.
The Ethernet address of the port listed on the left.
The IP address of the port listed on the left.
The IP mask of the port listed on the left.
The DHCP setting of the port listed on the left.
The total time the ZyWALL has been on.
The ZyNOS Firmware version and the date created.
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
Please enter selection:
ZyWALL 10~100 Series Internet Security Gateway
DESCRIPTION
21-3