Step 4.
After a successful restoration you will see the following screen. Press any key to restart the
ZyWALL and return to the SMT menu.
Figure 22-12 Successful Restoration Confirmation Screen
22.4 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload configuration files
by following the procedure in the previous Restore Configuration section or by following the instructions in
Menu 24.7.2 - System Maintenance - Upload System Configuration File (for console port).
Firmware and Configuration File Maintenance
Figure 22-11 Restore Configuration Example
Save to ROM
Hit any key to start system reboot.
ZyWALL 10~100 Series Internet Security Gateway
Type the configuration file's
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.
22-11