LABEL
Exclude specified
address ranges from the
Content Filter
enforcement
Add Range
From Address
To Address
Apply
Add Range
Delete Range
Reset
17.6 Customizing
Click Content on the navigation panel, and then the Customize tab to open the following screen.
Use this screen to customize the content filter list by adding or removing specific sites from the filter list.
Content Filtering
Table 17-5 Content Filter: Exempt Zone
Select to exempt a specific range of users on your LAN from Content Filter
policies.
Fill in the two fields below if you selected one of the last two options above.
Type the beginning IP address of the specific range of users on your LAN.
Type the ending IP address of the specific range of users on your LAN, then
click Add Range.
Click Apply to save your changes back to the ZyWALL.
Click Add Range after you have filled in the From Address and To Address
fields above.
Click Delete Range after you select the range of addresses you wish to
delete.
Click Reset to begin configuring this screen afresh.
ZyWALL 10~100 Series Internet Security Gateway
DESCRIPTION
17-11