Panasonic KX-UDT121CE Operating Instructions Manual page 37

3.
Press to open the phonebook sub-menu.
4.
Press [ ] or [ ] to select "Edit", and then press
.
5.
Edit the name, phone number, category, and
default number setting as necessary.
6.
Press .
Note
•
To change a character or digit, press [ ] or
[ ] to highlight it, press
then enter the new character or digit.
•
To clear an entire line, press and hold
more than 1 second.
•
To move the cursor to the left or right, press
[ ] or [ ], respectively.
•
For details about searching for an item in the
phonebook, see "Searching for an Item in the
Phonebook (Page 28)".
•
For details about entering characters, see
"Entering Characters (Page 42)".
Storing an Item Using Predialling
You can dial a number first and then add it as a
phonebook entry.
1.
In standby mode, dial a number.
2.
Press .
3.
Enter a name (max. 24 characters), and then press
.
4.
Press [ ] or [ ] to select a phone number type
(A to E), and then press
5.
Enter the phone number (max. 32 digits), and then
press .
6.
Repeat steps 4 and 5 to add additional phone
number types.
7.
Press [ ] or [ ] to select "Category Off", and
then press .
8.
Select a category, and then press
9.
To select a default number for the entry, press [ ]
or [ ] to select "Default TEL No", and then press
.
10.
Press [ ] or [ ] to select the number to use as the
default number, and then press
11.
Press .
Note
•
Steps 7 and 8 can be omitted if you do not want
to assign a category.
Document Version 2012-11
Storing an Item Using the Incoming
or Outgoing Call Log
to delete it, and
You can add a number listed in the incoming or outgoing
call log to the phonebook.
1.
for
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
.
12.
13.
Note
.
.
•
Steps 9 and 10 can be omitted if you do not want
to assign a default number. (The first number
entered for an entry will automatically be
assigned as the default number.)
•
For details about entering characters, see
"Entering Characters (Page 42)".
In standby mode, press [ ] to open the Incoming
Call Log or press [ ] to open the Outgoing Call Log.
Press [ ] or [ ] to select a record in the log.
Press to open the phonebook sub-menu.
Press [ ] or [ ] to select "Save Phonebook", and
then press .
Edit the name if desired, and then press
Press [ ] or [ ] to select a phone number type
(A to E), and then press
Edit the phone number if desired, and then press
.
Repeat steps 6 and 7 to add additional phone
number types.
Press [ ] or [ ] to select "Category Off", and
then press .
Select a category, and then press
To select a default number for the entry, press [ ]
or [ ] to select "Default TEL No", and then press
.
Press [ ] or [ ] to select the number to use as the
default number, and then press
Press .
•
Steps 9 and 10 can be omitted if you do not want
to assign a category.
•
Steps 11 and 12 can be omitted if you do not
want to assign a default number. (The first
number entered for an entry will automatically
be assigned as the default number.)
•
For details about entering characters, see
"Entering Characters (Page 42)".
Customising the Telephone
.
.
.
Operating Instructions
.
37