Table of Contents
Advertisement
4.5
Alarm
M
1. Press the
2. Press the
<
3. Press the
+
6h
4h
2h
(
,
,
). (The default setting is Alarm OFF.)
If an alarm time is selected, the parent unit will beep for about 45
seconds after every 6, 4 or 2 hour period, and the alarm icon will
flash red.
4.6
Camera Control
4.6.1 Add (pair) a camera
1. Press the
M
2. Press the
<
del/add/view/scan
and the
+
3. Press the
the OK button to confirm.
CAM 1
CAM 2
4.
/
DOWN button to select the desired CAM, and press the OK button
to start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the
parent unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.6.2 View a camera
1. Press the
M
2. Press the
<
del/add/view/scan
and the
3. Press the
+
the OK button to confirm.
CAM 1
CAM 2
4.
/
DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
14
button and the menu bar will pop up.
LEFT button or
UP button or
-
button and the menu bar will pop up.
LEFT button or
menu will pop up.
-
UP button or
CAM 3
CAM 4
/
/
will pop up, press the
button and the menu bar will pop up.
LEFT button or
menu pops up.
UP button or
-
CAM 3
CAM 4
/
/
will pop up, press the
MBP34, MBP34/2, MBP34/3, MBP34/4, MBP34T Parent Unit Menu Options
>
RIGHT button until
DOWN button to select the alarm time
>
RIGHT button until
DOWN button to select
>
RIGHT button until
DOWN button to select
A
is highlighted.
C
is highlighted,
ADD
, and press
+
UP button or
C
is highlighted
VIEW
, and press
+
UP button or
-
-
Advertisement
Table of Contents
