Storing/Copying Patches; Restoring Factory Defaults - Zoom G1U Operation Manual

Guitar effects & usb audio i/f pedal
Table of Contents

Advertisement

Storing/Copying Patches (Store Mode)
An edited patch can be stored in the user-editable banks (A – J). It is also possible to store an
existing patch in another location to create a copy.
1
In play mode or edit mode, press the [STORE] key
The bank and patch number flash on the display.
Patches of the preset banks (0 – 9) are read-only. No
NOTE
patches can be stored or copied into these locations. If
you press the [STORE] key while a patch from the
preset area is selected, the patch "A0" (bank A, patch
number 0) will be selected automatically as default
store/copy target.
2
Select the store/copy target bank and patch number
• Use the [
]/[
] foot switches to select the bank/
W
Q
patch number.
• To switch only the bank, use the [BANK UP·
TAP] key.
· Only a user-editable bank (A – J) can be selected as
NOTE
store/copy target bank.
· During the store/copy process, the foot switch (FS01)
cannot be used to change banks.
16
3
When the store/copy process is completed, the G1u
returns to the previous mode, with the target patch
selected.
HINT
A0
Even after overwriting user patches with
other patches, their original content can be
restored in a single operation ("All Initialize"
function).
A8
To do this, turn power to the G1u on while
holding down the [STORE] key.
The indication "AL" appears on the display.
B8
ZOOM G1u
ZOOM G1u
Press the [STORE] key once more
To cancel the store process, operate the [VALUE] knob
before pressing the [STORE] key again.

Restoring Factory Defaults

To carry out the All Initialize function, press
the [STORE] key once more. All patch
settings are returned to the factory default
condition, and the unit switches to play
mode.
To cancel All Initialize, press the RHYTHM
[
R
AL
Storing/Copying Patches (Store Mode)
B8
/
] key instead of the [STORE] key.
P
When you carry out All Initialize, any
NOTE
newly created patches that were
stored in the user-editable bank will
be deleted (overwritten). Perform
this operation with care to prevent
losing any patches that you want to
keep.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents