Table of Contents
Advertisement
Chapter 4 - Linux Installation
Configuration
Filenames and paths
File transfer protocols
Serial port setup
Modem and dialing
Screen and keyboard
Save setup as dfl
Save setup as..
Exit
2.
From the Configuration menu, select Serial Port Setup and press Enter to display Serial port settings.
A - Serial Device
B - Lockfile Location
C - Callin Program
D - Callout Program
E - Bps/Par/Bits
F - Hardware Flow Control : Yes
G - Software Flow Control
Change which setting?
3.
Enter A to edit the Serial Device.
4.
Enter information for first port identified earlier. Remember you can only use the first port. For example,
0000:03:00.0: ttyS0 at MMIO 0xcdeffc00 (irq = 169) is a 16550A.
A - Serial Device
B - Lockfile Location
C - Callin Program
D - Callout Program
E -
F -
G - Software Flow Control : No
Change which setting?
5.
Press Enter to accept the change. You can change other settings; however, the modem should respond with
default settings in the other fields.
6.
Press Enter again to return to the Configuration menu.
Configuration
Filenames and paths
File transfer protocols
Serial port setup
Modem and dialing
Screen and keyboard
Save setup as dfl
Save setup as..
Exit
Exit from Minicom
7.
Select Exit and press Enter to go into minicom terminal mode. The response will be similar to:
Welcome to minicom 2.1
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
Compiled on Jan
14
Exit from Minicom
: /var/lock
:
:
Bps/Par/Bits
Hardware Flow Control : Yes
7 2007, 04:48:39.
: /dev/modem
: 38400 8N1
: No
: /dev/ttyS0
: /var/lock
:
:
: 38400 8N1
MultiModem ZPX UPCI/PCIe User Guide
Advertisement
Table of Contents
