Bank Control Commands
Acquire Bank No. <BANKGET command>
This command acquires the current bank No.
<Command format>
B A N K G E T
C R
<Response format>
When processing ends successfully
C R
Bank No. (max. 1 digit)
When processing fails
C R
E R
<Explanation of parameters>
Bank No.
Switch Bank <BANKSET command>
This command switches to the specified bank No.
<Command format>
B A N K S E T
<Response format>
When processing ends successfully
C R
O K
When processing fails
C R
E R
<Explanation of parameters>
Bank No.
ZG2-DSU User's Manual
The acquired bank No. is returned. (1 - 4)
C R
Bank No.
Specifies the bank No. after the bank is switched. (1 - 4)
Serial Communication
69