Bank Functions
Up to four setups can be stored on the Data Storage Unit, and these can be switched
when setting up the unit. A set of these settings is called a "bank."
Switching Banks
Bank 1 is selected as the default. However, other banks 2 to 4 can be selected.
FUN mode-[BANK]-[CHANGE]
Setting value
BANK1, BANK2, BANK3,
BANK4
Note
Serial communication commands can be used to switch banks from an external device.
Switch Bank <BANKSET command> p.69
Clearing Banks
The content of the currently selected bank is cleared.
FUN mode-[BANK]-[CLEAR]
Important
[SYSTEM] settings and the display details in the RUN mode are not cleared.
ZG2-DSU User's Manual
Description
Selects the target bank. (default value: BANK1)
49
Bank Functions