Judging Measurement Values (Alarm Outputs)
Specifying Tasks
When outputting the judgment results of measurements as alarms, specify the channel
and task to be used for judgment.
FUN mode-[I/O SET]-[SOURCE]
Setting value
CH
TASK
Setting Judgment Conditions
Set the two values, HIGH and LOW thresholds, used for alarm output. Three judgment
results are output, [HIGH], [PASS] and [LOW]. Set the judgment conditions in the TEACH
mode.
HIGH threshold
Measurement
value
LOW threshold
HIGH
Output
PASS
LOW
42
Judging Measurement Values (Alarm Outputs)
Description
Selects the channel of the Sensor Controller targeted for alarm
judgment. (1, 2, default value: 1) CH2 is not displayed when it is not
connected.
Selects the task targeted for alarm judgment. (1-8)
ON
OFF
ON
OFF
ON
OFF
(ON when
measurement value >
HIGH threshold)
(ON when LOW
threshold ≤
measurement value ≤
HIGH threshold)
(ON when
measurement value <
LOW threshold)
ZG2-DSU User's Manual