Saving Bank Data to Memory Cards
Bank data on Sensor Controllers can be saved on a Memory Card inserted on the Data
Storage Unit.
16 sets of bank data on the Sensor Controller are saved to a single file on the Data
Storage Unit.
RUN mode-MENU key-[BANK]-[CONT
Setting value
CH
File
Important
If a file number already containing saved bank settings is selected, those bank settings will be
overwritten.
Note
Serial communication commands can be used to save bank data to Memory Cards.
BKCTR2MC command p.65
38
Saving Bank Data to Memory Cards
→
Description
Selects the channel of the Sensor Controller whose bank data is to
be saved. CH2 is not displayed when it is not connected.
Selects the bank file number to save to the Memory Card. (BANK0
to 255)
CF]
ZG2-DSU User's Manual