Initializing Controller Settings
Important
The settings of all banks and logging data are initialized regardless of the currently saved bank
No. and logging data. To save settings and data, back them up to a personal computer before
performing initialization.
Acquiring setup data <DATAGET command> p.66
1
SOURCE
3
BANK
1
EJECT
3
INIT
Initialize?
1
OK
Is it all right?
1
OK
INITIALIZE Executed
ZG2-DSU User's Manual
FUN
RUN
TEACH
2
I/O SET
4
SYSTEM
2
SAVE
4
INFO
2
CANCEL
2
CANCEL
1
Switch to the FUN mode.
2
Select [SYSTEM].
3
Select [INIT].
The
confirmation
displayed.
4
Select [OK].
The final confirmation message is
displayed.
5
Select [OK].
The settings are initialized, and the
"INITIALIZE Executed" message is
displayed.
Initializing Controller Settings
message
is
23