Starting and Ending Logging
The following describes the procedure for starting and ending logging.
Starting Logging
Available MB
Stopping
Note
Display details during logging can be changed by the
To display the amount
of remaining space on a
Memory Card
Available MB
Stopping
Ending Logging
34
Starting and Ending Logging
FUN
RUN
TEACH
←→
↑ START
To display the measurement value of a task
to be logged
←→
CH1 TASK1
↑ START
Stopping
1
Switch to the RUN mode.
2
Either input the START signal or
↑
press the
Logging is started.
←→
keys.
←→
CH1 TASK2
↑ START
Stopping
1
Either input the STOP signal or
↓
press the
Logging ends, and data is saved to
the Memory Card.
Important
The Data Storage Unit cannot accept the next
logging operation while data is being saved to
the Memory Card.
Whether or not start of logging can be accepted
can be known by the BUSY signal.
Timing charts p.56
key.
←→
↑ START
key.
ZG2-DSU User's Manual