Connector; Connector 2-11; Fan Power Connector: Cpufan1, Sysfan1~3; Serial Ata Connector: Sata1~6 (Sata 6Gb/S For Sku1:C236) - MSI 919-98E2-001 Manual

MS-98E2

Connector

Fan Power Connector: CPUFAN1, SYSFAN1~3

The fan power connectors support system cooling fan with +12V. When con-
necting the wire to the connectors, always note that the red wire is the positive
and should be connected to the +12V; the black wire is Ground and should be
connected to GND. If the motherboard has a System Hardware Monitor chipset
onboard, you must use a specially designed fan with speed sensor to take advan-
tage of the CPU fan control.
Important
• Please refer to the recommended CPU fans at processor's official website or
consult the vendors for proper CPU cooling fan�
• Fan cooler sets with 3- or 4-pin power connector are both available�

Serial ATA Connector: SATA1~6 (SATA 6Gb/s for SKU1:C236)

Serial ATA Connector: SATA1~3 (SATA 6Gb/s for
SKU2:H110)
This connector is a high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
Important
Please do not fold the SATA cable into a 90-degree angle� Otherwise, data loss
may occur during transmission�
2-11