Accessories; To Add The Keyless Entry - Chamberlain 1000SDC-R, 2000SDC-R Owner's Manual

Accessories Available For Your Opener
Model 1702LMC Outside Quick Release:
Required for a garage with NO access
door. Enables homeowner to open
garage door manually from outside by
disengaging trolley.
Outside Keylock:
Model 59LMC
Operates the garage door automatically
from outside when remote control is
not handy.
Model 88SD 8 foot Complete Rail:
To allow an 8 foot door to open fully.
Model 97LMC Extension Brackets:
(Optional) For safety sensor
installation onto the wall or floor.
Model 98LMC Motion Detecting Door Control
Panel: Multi-function door control with
motion sensor that automatically turns
opener lights on for 5 minutes when it
detects a person entering the garage. Sensor
can be easily deactivated when desired.
Model 976LMC SECURITY Keyless Entry:
Enables homeowner to operate garage door opener from outside by entering code on specially
designed keyboard. Also can add a temporary pass code for visitors or service persons. This
temporary code can be limited to a programmable number of hours or entries.
We recommend that you program your code before you
install the Keyless Entry. You will not need assistance,
and you can test the reception at the mounting location
before installation.
1. Choose a 4-digit code using numbers from 0 to 9
(a number can be used more than once, for example,
4, 0, 4, 1).
2. Press the four buttons for the code, then press and hold
the Enter button. The indicator light on the door opener
panel will blink.
3. Press and release the "Smart" (learn) button on the
opener panel. After the opener lights flash, release the
Enter button.
Test by pressing the the code, then press Enter. The door
should begin to move.
Model 971LMC
Model 972LMC
Model 973LMC
Model 974LMC
Model 970LMC

To Add the Keyless Entry

You may also program the Keyless Entry from the
Multi-Function Door Control, as follows:
1. With the door closed, enter the four digit code desired,
then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
34
SECURITY Single-Function
Remote Control:
Includes visor clip.
SECURITY 2-Channel
Remote Control:
Includes visor clip.
SECURITY 3-Channel
Remote Control:
Includes visor clip.
SECURITY 4-Channel
Remote Control:
Includes visor clip.
SECURITY 3-Channel Mini
Remote Control:
With key ring and Velco fastening
strip.