Drill 2×8mm holes to accommodate the plate II. Screw and tighten the plate II onto
the wall with two screws and wall plugs provided. Slide up the upper chimney and
Drill 2×8mm holes to accommodate the plate II. Screw and tighten the plate II onto
fix the upper chimney with plate II with 2 screws ST4x8mm.
the wall with two screws and wall plugs provided. Slide up the upper chimney and
Drill 2×8mm holes to accommodate the plate II. Screw and tighten the plate II onto
fix the upper chimney with plate II with 2 screws ST4x8mm.
the wall with two screws and wall plugs provided. Slide up the upper chimney and
Fix the lower chimney with the hood with 2 screws ST4x8mm.
fix the upper chimney with plate II with 2 screws ST4x8mm.
Fix the lower chimney with the hood with 2 screws ST4x8mm.
Fix the lower chimney with the hood with 2 screws ST4x8mm.
CCH_v3.indd 13
Please keep this instruction manual for future reference
7
7
Instruction manual CCH
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
7
7
Instruction manual CCH
Instruction manual CCH
13
13
13
23/07/2018 16:17