Related Manuals for Caple CE902SS
Summary of Contents for Caple CE902SS
- Page 1 C e i l i n g H o o d I n s t r u c t i o n M a n u a l CE9 0 2S S/ CE9 02 WH Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk...
- Page 2 C O N T E N T S Warnings Environmental Protection Opening the Panel Installation Remote Control Timing Cleaning and Maintenance Caple Contact Details Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 3 (eg. centralized heating, radiators, water heaters, etc.). To evacuate the air outlet, please comply with the pertaining rules given by competent authorities. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 4 - Before carrying out any cleaning or maintaining operations, the appliance needs to be removed from the electric grid. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 5 - It must only be used as a domestic appliance to extract vapours and remove odours from cooking. Any other usage is not supported by the manufacturer and could be dangerous. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 6 - The cooker hood can get very hot during cooking due to heat rising from the hob. - Do not touch the housing or the grease filters until the cooker hood has cooled down. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 7 › Staff kitchen areas in shops, offices and other working environments. › Farm Houses. › By clients in hotels, motels and other residential type environments. › Bed and breakfast type environments. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 8 Registration can also be completed online by visiting www.caple.co.uk. Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase. If you fail to show your warranty card you will incur all repair charges.
- Page 9 Radio Equipment Directive (RED) 2014/53/EU. This Declaration is issued under the sole responsibility of the manufacturer. Hereby, Caple declares that the radio equipment included in the product is in compliance with the RED directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on our website www.caple.co.uk.
- Page 10 Use a duct with a diameter of 150mm constant over the entire length. Use a duct of recognised and approved material. For more information on venting, please see our ‘Extraction & Ventilation guide’ available at www.caple.co.uk 10 Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 11 FIG.2 FIG.3 Open the stainless steel panels, following the instructions in ‘Opening the Panels’ and remove the grease filters in order to avoid damaging them and to allow installation. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 12 210mm between the ceiling and the false ceiling (Fig.6); in case of a larger gap between the hood and the ceiling, you need to use longer threaded bars. FIG.6 Make the electrical connections and connect the air outlet pipe. 12 Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 13 Connect the internal motor or the external motor’s cable to the terminal board found inside the plastic box of the wiring. The cables are colour coded, ensure you respect the cables colours when performing the electrical connection (Fig.9). FIG.9 Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 14 R E M O T E C O N T R O L Remote control used for the remote operation of Caple hoods: T E C H N I C A L DATA Alkaline battery powered: 12V mod. 27A Operating frequency: 433.92 Mhz...
- Page 15 When LED’s light on, press buttons: (within 5 seconds). LED’s flashing 3 times indicate the procedure is completed. WA R N I N G : This operation permanently deletes the preset codes. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 16 › Releasing the key during reduction or increase - light keeps the luminous intensity reached. › Light on - dimmed - continuously press the light key - brightness is inverted if compared to the previous function. Instruc CE1101_CE902_Instruction manual.indd 11 16 Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 17 The products are endowed with an electronic device which automatically switches the product off after 4 hours working from the last operation. Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 18 › If the appliance is working at 3rd speed, it is automatically switched to 2nd speed, after 7 minutes operation. Operation speeds can also be changed during operation. The energy consumption of the appliance in standby mode is lower than 0.5W. 18 Instruction manual CE902SS/CE902WH Please keep this instruction manual for future reference...
- Page 19 R E P L A C I N G T H E L E D L I G H T Using an appropriate tool, remove the LED bar from its seat (refer to fig.12) and disconnect it electronically using the appropriate connector. To purchase a replacement light, Contact Caple Service: T - 0117 938 7420 E - service@caple.co.uk FIG.12...
- Page 20 Caple Service Fourth Way Avonmouth T: 0117 938 1900 Bristol E: service@caple.co.uk BS11 8DW www.caple.co.uk...