Watchguard AP 327 Series Quick Start Manual page 4

3 CONNECT YOUR AP
1. Plug one end of an Ethernet cable into the LAN1 (PoE) port on the AP
2. Plug the other end into a PoE+ (802.3at) compatible switch or PoE+ injector
6
The use of decreased PoE (802.3af) power results in:
• Limited functionality
• Reduced range and throughput performance
• The ability to block Wi-Fi threats is greatly reduced
LAN1 (PoE)
WatchGuard offers a high power PoE+ (802.3at) power injector sold
separately
7