Pitch Bend Range - Yamaha MU5 Owner's Manual

Pitch Bend Range

Selected Part
Range
Default
This determines the maximum range over which the pitch of the
Part can be changed by Pitch Bend messages. Most MIDI
keyboards feature a Pitch Bend wheel, which allows you to
"bend" the pitch up or down as you play. Pitch Bend data can
also be recorded to a sequencer along with normal note data, and
then played back using the MU5.
The default setting (+02) allows you to continuously change the
pitch by a whole tone, up or down. Positive values raise the pitch
when you move the Pitch Bend wheel up, while negative values
lower the pitch when you move the wheel up.
42
PART PGM
1 2 3 4 5 6 7 8 9 10 1112
-24 – +24 semitones
+02
Bend Range setting
# VOICE NAME
13 14 15 16
Shows Bend
Range setting for
each Part.