Yamaha MU5 Owner's Manual page 64

3.2.2.8 Portamento
Control #
84
Portamento time is always set to 0.
3.2.2.9 (RPN) LSB / MSB
Control #
100
101
(Refer to section 3.2.7)
3.2.3 Program change
Refer to the Voice List on page add-2.
3.2.4 Pitch Bend
Pitch Bend resolution is 14 bit (-8192 – +8191).
3.2.5 Channel Mode Messages
The MU5 receives and responds to the following channel mode messages:
2nd byte 3rd byte
120 0
121 0
123 0
124 0
125 0
126 0 – 127
127 0
3.2.5.1 All Sounds Off
This mutes all sounds of the corresponding channel. However, when the sustain
(damper) pedal is held or a note is held down on the keyboard, the sound continues.
3.2.5.2 Reset All Controllers
Controllers are set to the following values:
Controller
Pitch bend
Modulation
Expression
Hold 1
RPN
The following values are not reset: Program change, Bank select MSB/LSB,
Volume, Pan, Pitch bend sensitivity, Fine tuning, Coarse tuning, and Local control.
Parameter
Portamento control
Parameter
RPN LSB
RPN MSB
All sound off
Reset all controllers
All note off
Omni off
Omni on
Mono
Poly
Reset Value
0 (normal)
0 (OFF)
127 (Max)
0 (OFF)
(Not set. Internal data doesn't change.)
MIDI Data Format
Range
0 – 127
Range
0 – 127
0 – 127
add-
13