Nec Pc-9800 Series; Connecting To Other Midi Devices - Yamaha MU5 Owner's Manual

The NEC PC-9800 Series computers are widely used in Japan.
For use with these computers, set the HOST SELECT switch on
the MU5 to PC-1. Operation is the same as for
the PC-2 setting explained above. The only
difference between PC-1 and PC-2 is the
communication baud rate. (See page 46.)

Connecting to Other MIDI Devices

The MU5 is equipped with MIDI IN and OUT terminals, allowing you to use it
in any MIDI system. Example uses for the built-in MIDI interface include:
• Connecting to a MIDI keyboard (for playing the sounds of the MU5
from that keyboard).
• Connecting to a MIDI tone generator (for playing the sounds of that
tone generator from the MU5).
• Connecting to a computer equipped with a MIDI interface (either
internal or external).
• Connecting to a hardware sequencer (such as the Yamaha QY20).
• Connecting to a MIDI data storage device (such as the Yamaha MDF2
MIDI Data Filer).
20

NEC PC-9800 Series

MU5
IN
OUT
MU5
IN
OUT
MU5
IN
OUT
OUT
IN
OUT
IN
OUT
MDF2
IN
HOST SELECT
MIDI PC-2 PC-1 Mac