Leveling - LG LSXC22436 Series Owner's Manual

18 INSTALLATION
7
CONNECT THE TUBING TO THE VALVE
Place the compression nut and ferrule
(sleeve) for copper tubing onto the end of
the tubing and connect it to the shuto
valve. Make sure the tubing is fully inserted
into the valve. Tighten the compression nut
securely.
Saddle-Type
Shutoff Valve
Packing Nut
Outlet Valve
8
FLUSH OUT THE TUBING
Turn the main water
out the tubing until the
water is clear.
Shut the water o at the
water valve after about
one quart of water has
9
CONNECT THE TUBING TO THE
REFRIGERATOR
NOTE: Before making the connection to
the refrigerator, be sure that the refrigerator
power cord is not plugged into the wall
outlet.
a. Remove the plastic exible cap from the water
valve.
b. Place the compression nut and ferrule (sleeve)
onto the end of the tubing as shown.
c. Insert the end of the copper tubing into the
connection as far as possible. While holding
the tubing
Tubing Clamp
¼ in.
Compression
Nut
Ferrule (sleeve)
Compression
Nut
Ferrule (sleeve)
tubing.
tting.
¼ in. Tubing
Refrigerator
Connection
10
TURN THE WATER ON AT THE
SHUTOFF VALVE
Tighten any connections that leak.
CAUTION
Check to see if leaks occur at the water line
connections.

Leveling

The refrigerator has two front leveling legs.
Adjust the legs to alter the tilt from front-to-back
or side-to-side. If the refrigerator seems unsteady,
the doors do not close easily, adjust the refrigerator's
tilt using the instructions below:
NOTE: Tools Required: 11/16" (18mm) wrench
or flat-blade screwdriver.
1 Turn the leveling leg counterclockwise
to raise that side of the refrigerator or
clockwise to lower it. It may take several
turns of the leveling leg to adjust the tilt of
the refrigerator.
Left leveling
leg
Height
di erence
Height
di erence
C C
CHANGE FILTER F F PRESS & HOLD