LG LSXC22436 Series Owner's Manual page 16

16 INSTALLATION
If your existing copper water line
has a red tting at the end, you
will need an adapter (available at
plumbing supply stores) to connect
the water line
to the
refrigerator OR
you can cut o
the ared tting with a tube cutter
and then use a compression tting.
Shutoff valve to connect to the cold
water line. The shutoff valve should
have a water inlet with a minimum
inside diameter of 5/32 in. at the
point of connection to the COLD
WATER LINE. Saddle-type shuto
valves are included in many water
supply kits.
Before
purchasing,
make sure
a saddle-
type valve complies with your local
plumbing codes.
NOTE
A self-piercing saddle type water valve
should not be used.