Leveling And Door Alignment - LG LCFS22EX Series Owner's Manual

LEVELING AND DOOR ALIGNMENT

Leveling
After installing, plug the refrigerator's power cord into
a 3-prong grounded outlet and push the refrigerator
into the final position.
Your refrigerator has two front leveling legs—one on
the right and one on the left. Adjust the legs to alter
the tilt from frontto-back or side-to-side. If your refrig-
erator seems unsteady, or you want the doors to close
more easily, adjust the refrigerator's tilt using the
instructions below:
NOTE: Tools Required: 11/16 in (18 mm) wrench or flat
blade screwdriver.
1. Turn the leveling leg to the left to raise that side of
the refrigerator or to the right to lower it. It may take
several turns of the leveling leg to adjust the tilt of the
refrigerator.
NOTE: Having someone push backward against the
top of the refrigerator takes some weight off of the
leveling legs. This makes it easier to adjust the legs.
2. Open both doors again and check to make sure that
they close easily. If the doors do not close easily, tilt the
refrigerator slightly more to the rear by turning both
leveling legs to the left. It may take several more turns,
and you should turn both leveling legs the same
amount.
NOTE: Your refrigerator is uniquely designed with two
fresh food doors. Either door can be opened or closed
independently of the other. You may have to exert
slight pressure on the doors to get them to close
completely.
REFRIGERATOR INSTALLATION
Door Alignment
If the space between your doors is uneven, follow the
instructions below to align the doors:
1. With one hand, lift up the door that you would like to
raise at the middle hinge.
2. With your other hand, use pliers to insert snap ring as
shown.
3. Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with the refrigerator in the
Use & Care Guide packet.)
12