Louvre Installation; Logo Placement; Optional Blower Installation - Napoleon Grandville GVF36 Installation And Operating Instructions Manual
Propane/natural gas unvented millivolt system
Hide thumbs
Also See for Grandville GVF36:
Table of Contents
Advertisement
16
5.5
LOUVRE INSTALLATION
A
B
C
5.6
LOGO PLACEMENT
Remove the backing of the logo supplied and place on the screen cover, as
indicated.
6.0 OPTIONAL BLOWER INSTALLATION
TURN OFF THE GAS AND ELECTRICAL POWER BEFORE SERVICING THIS APPLIANCE.
USE ONLY WOLF STEEL APPROVED OPTIONAL ACCESSORIES AND REPLACEMENT PARTS WITH
THIS APPLIANCE. USING NON-LISTED ACCESSORIES (BLOWERS, DOORS, LOUVRES, TRIMS, GAS
COMPONENTS, VENTING COMPONENTS, ETC.) COULD RESULT IN A SAFETY HAZARD AND WILL
ENSURE THAT THE FAN'S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE
APPLIANCE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER
THE WIRE HARNESS PROVIDED IN THE BLOWER KIT IS A UNIVERSAL HARNESS. WHEN
INSTALLED, ENSURE THAT ANY EXCESS WIRE IS CONTAINED, PREVENTING IT FROM MAKING
W415-0297 / P / 02.03.12
CLIPS
CENTRE SLOT
A
HOOD
Attach the hood by
pressing the top fl ange
into the clips along the
top of the louvre open-
ing. Secure using a
screw through the centre
slot.
WARNING
!
RISK OF FIRE AND ELECTRICAL SHOCK.
VOID THE WARRANTY AND CERTIFICATION.
CORD BENEATH THE APPLIANCE.
CONTACT WITH MOVING OR HOT OBJECTS.
SLOT
TAB
B
UPPER LOUVRES
Insert the louvre tabs
into the slots located
at the top left and right
corners of the unit.
SLOT
HINGE CLIP
C
LOWER LOUVRES
Insert the hinge clips
into the slots located at
the bottom left and right
corners of the unit. To
remove the louvres, pull
the back tabs of the clips
forward, while pushing
the louvre assembly
back. Lift the clip.
57.3
51.5
Advertisement
Table of Contents
