Hood; Logo Placement; Louvre Installation - Napoleon GSS36N Installation And Operating Instructions Manual

5.2

HOOD

The curtain mesh must be kept fully closed during operation to help
prevent accidental burns from occurring.
The heater must not be used when the hood is removed. Hook
the hood over the lip of the curtain
support plate.
5.3

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the screen cover, as indicated.
5.4

LOUVRE INSTALLATION

HINGE SCREEN
C
HINGE SCREEN: Position the hinge screen into
place and with the control door open, secure to the
fi rebox using three screws.
HOOD
BRACKET
SLOT
A
LOUVRE
B
LOWER LOUVRES
(VALVE CONTROL DOOR)
HOOD
CURTAIN
MESH
UPPER LOUVRES: Insert the
upper louvres into the slots
on both brackets. Press the
top fl ange of the hood into
the four clips located along
the top of the appliance as
shown.
LOWER LOUVRES: Attach
each hinge to the fi rebox with
2 screws.
W415-0807 / C / 09.02.16
13