Hood; Louvre Installation - Napoleon GVF40P Installation And Operating Instructions Manual

22
7.4

HOOD

APPLIANCE SCREENS MUST BE CLOSED WHILE THE APPLIANCE IS IN OPERATION.
The appliance must not be used when the hood is
removed. Hook the hood over the lip of the curtain sup-
port plate.
7.5

LOUVRE INSTALLATION

NOTE: The protective wrap on plated parts is best removed when the assembly is at room temperature
but this can be improved if the assembly is warmed, using a hair dryer or similar heat source.
A
B
C
W415-0810 / 06.11.09
!
CURTAIN SUPPORT
PLATE
HOOD
FIGURE 7.4a
CLIPS
CENTER SLOT
A
HOOD
Attach the hood by
pressing the top fl ange
into the clips along the
top of the louvre open-
ing. Secure using a
screw through the centre
slot.
WARNING
CURTAIN
MESH
FIGURE 7.4b
SLOT
TAB
B
UPPER LOUVRES
Insert the louvre tabs
into the slots located
at the top left and right
corners of the unit.
HOOD
SLOT
HINGE CLIP
C
LOWER LOUVRES
Insert the hinge clips
into the slots located at
the bottom left and right
corners of the unit. To
remove the louvres, pull
the back tabs of the clips
forward, while pushing
the louvre assembly
back. Lift the clip.
57.2