Table of Contents
Advertisement
802.11AC Wireless Access Point
Installation Manual
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
2.2 Installation Environment Requirements
Before the installation, please check the installation conditions of the device to make
sure that the device is in the good operating environment in a long time. Check this with
the following aspects.
The temperature and humidity environment requirements of the device are as below:
Standard working environment temperature (indoor)
Storage temperature
Working humidity (non-condensing)
2.3 Equipment Accessories
Please refer to the packing list.
2.4 Installation Tools
When installing WL8200 series indoor AP, the following tools may be used
(user-owned).
Horizontal
ruler
Table 2-1 The temperature and humidity index
Items
Permanent
Knife
marker
2-2
Chapter 2 Preparation for Installation
-10℃～55℃
-40℃～70℃
5%～95%
Wire
stripper
Range
Network pliers
Advertisement
Table of Contents
