Digitalchina Networks WL8200 Series Installation Manual page 11

802.11AC Wireless Access Point
Installation Manual
1. The width of T-keel is from 12mm to 30mm.
2. This installation method is only applied to the T-keel but not the other kinds of
keels.
The T-keel mounting kit includes two plastic mounting kits and two fixing screws, and
they can be found in the accessory bag.
WL8200 series AP provides two kinds of mounting kits whose width are 15cm and
24cm. The client can choose the right mounting kit according to the actual installation
scenario. The steps are as below:
Step 1: Choose the right mounting kit according to the width of the T-keel and use the
two fixing screws to fix the mounting kit on the AP as below:
Step 2: Close the mounting kit of AP to the T-keel as below:
Fig 3-4 mounting kit
Fig 3-5 Fix the mounting kit on AP
3-4
Chapter 3 AP Installation