Chapter 1 Device Introduction - Digitalchina Networks WL8200 Series Installation Manual

802.11AC Wireless Access Point
Installation Manual

Chapter 1 Device Introduction

WL8200 Series Wireless AP ( Access Point) is the new 1000Mb wireless AP device
based on 802.11n and 802.11AC standard with high performance from DigitalChina
Networks Limited (DCN). 802.11AC Wireless Access Point can work in the band of
2.4GHz and 5GHz. It can provide higher bandwidth and cover wider range. The uplink of
this AP adopts the 1000Mb Ethernet port which supports PoE power. It expands the
bandwidth. This series AP includes two products: WL8200-I2 is the 2X2 AP, WL8200-I3 is
the 3X3 AP.
The basic configuration of WL8200 Series indoor AP is as below:
Product Model
WL8200-I2
Fig 1-1 WL8200 Series
Table 1-1 basic configuration
Applicable Protocols
and Features
• IEEE802.11a/b/g/n/ac
• Double Radiofrequency
Chapter 1 Device Introduction
Antenna
Built-in antenna:
•2.4G gain 4.5dBi
•5G gain 5dBi
1-1
Maximum Power
Consumption
Default: ≤12.92W
Using USB: ≤18W