Connect Ap Power; Checking Before Power; Poe Power - Digitalchina Networks WL8200 Series Installation Manual

802.11AC Wireless Access Point
Installation Manual
Step 3: Whirl the AP by counterclockwise and closing to the T-keel to make the two
diagonal slots of the mounting kit buckle the T-keel. At the same time, the two elastic
stoppers on the mounting kit buckle the T-keel for locking. After complete the installation, it
is as below:

3.5 Connect AP Power

WL8200 series indoor AP support the local power and PoE power. User can choose
the method according to the actual network environment.

3.5.1 Checking before Power

After installing the AP, user should check it before power every time as below:
When AP use the local power, please ensure the power is connected normally to
ground.
When AP use the 802.3af/at standard PoE power, please ensure the power is
connected normally to ground.

3.5.2 PoE Power

Fig 3-6 Fix the AP on the T-keel
Fig 3-7 Complete the AP installation
3-5
Chapter 3 AP Installation