Yamaha DS2416 Owner's Manual page 160

162
Effects Parameters
DELAY->REV (delay and reverb in series)
Parameter
DELAY L
DELAY R
FB.DLY
FB.GAIN
DELAYHI
REV TIME
INI.DLY
REV HI
DIFF.
DENSITY
HPF
LPF
DLY BAL
DIST->DELAY (distortion and delay in series)
Parameter
DST TYPE
DRIVE
MASTER
TONE
N.GATE
DELAY
FB.GAIN
HI.RATIO
FREQ.
DEPTH
DLY BAL
1. DST1, DST2, OVD1, OVD2, CRUNCH (DST = distortion, OVD = overdrive)
DS2416
Range
0.0–1000.0 ms
0.0–1000.0 ms
0.0–1000.0 ms
–99 to +99%
0.1–1.0
0.3–99.0 s
0.0–500.0 ms
0.1–1.0
0–10
0–100%
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
0–100%
Range
1
0–100
0–100
–10 to +10
0–20
0.0–2725.0 ms
–99 to +99%
0.1–1.0
0.05–40.00 Hz
0–100%
0–100%
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
Delay high-frequency feedback ratio
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Delay and delayed reverb balance (100% = delay
only)
Description
Distortion type
Distortion drive
Master volume
Tone control
Noise reduction
Delay time
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Level balance of delay