Control Panel - Midea Mru21F2AWW User Manual

PROBLEM POSSIBLE CAUSE
The The room temperature is
compressor
hotter than normal.
turns on and
A large amount of food
off frequently.
was recently added.
The door is not closed
completely or was opened
too often.
The freezer has been
disconnected for a period
of time.
The temperature control
was not set correctly.
Freezer has
Freezer needs cleaning.
an odor
Improperly wrapped food
is giving off an odor.

CONTROL PANEL

PROBLEM CAUSE
The control The control panel is
panel is
locked.
unresponsive
ERROR CODES
Code
Both Flashing
Both Flashing
Both Flashing
This is normal.
Allow time for the recently
added food to cool, and
then check again.
Check the door gasket and
food distribution to make
sure the door will close
completely.
Allow 4 hours for the
freezer to cool completely
before adding food.
Set the temperature
control to the correct
setting.
Clean the freezer. See,
"Cleaning."
Wrap food tightly or seal
before storing it in the
freezer.
Meanings Cause
Temperature Temperature
sensor fault sensor failure.
Defrost sensor Defrost sensor
fault failure.
Ambient Ambient
Temperature temperature
sensor fault sensor failure.
SOLUTION
CORRECTION
Press and hold SETTING
for 3 seconds to unlock
the control panel.
Solution
Call for
service.
Call for
service.
Call for
service.
17