Handset - Gigaset E370A User Manual

Handset

Handset
Connecting the charging cradle
¤
Connect the flat plug of the power adapter
¤
Plug the mains unit into your power socket
To remove the plug from the charging cradle again:
¤
Disconnect the power adapter from the mains
power supply.
¤
Press the release button
¤
Pull out the plug
Setting up the handset for use
The display is protected by a plastic film.
Inserting the batteries
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries
(for correct +/- direction,
see diagram).
8
.
3
.
4
¤
Fit the battery cover from
the top.
¤
Press the cover until it
clicks into place.
.
1
.
2
Please remove the protective film!
2
1
To re-open the battery cover:
¤
Insert a fingernail behind
the notch at the top of the
cover and slide it
downwards.
4
3