Panasonic KX-TG6812NZ Operating Instructions Manual page 28

Programming
Main menu: "Key Finder"
Sub-menu 1
Search
Battery Check
Main menu: "Ringer Setup"
Sub-menu 1
Ringer Volume
*5, *6
Ringtone
(Handset)
Night Mode
*2, *7
First Ring
Main menu: "Caller Barred"
Operation
Storing/Viewing bar call numbers.
*1 KX-TG6821 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
(Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product ("Ringtone 3" - "Ringtone 40") are used with
permission of © 2012 Copyrights Vision Inc.
*7 If you do not want the unit to ring before the caller information is received, set to "Off".
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*8 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation
guide for more information on the key finder.
28
PNQX5803YA_0719_ver122.pdf
*8
Sub-menu 2
–
–
*16, *17
Sub-menu 2
Handset
*1, *2
Base Unit
–
On/Off
Start/End
Ring Delay
–
*2, *18
28
Settings Code
– #655
–
Settings Code
0-6: Off-6 <6> #160
0-6: Off-6 <3> #G160
<Ringtone 1> #161
1: On 0: <Off> #238
<23:00/06:00> #237
1: 30 sec. #239
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
1: <On> 0: Off #173
Code
#217
–
18
–
–
30
30
30
–
30
2013/07/19 10:53:44