Audio Dubbing - Panasonic AG-DVC60P Operating Instructions Manual

Audio dubbing

Background music or narration can be added to the
images you have recorded on the tape.
1
Press the MODE button to set the camera-recorder
to the VCR mode.
2
Using the menus (P62-64), select the audio record-
ing system at the AUDIO REC item on the
RECORDING SETUP screen. (P69)
32K (12bit):
The sound is recorded using the 12-bit/32kHz (4-
channel) system.
Use this mode when you want to keep the sound
that was heard while you were shooting even after
audio dubbing has been performed.
48K (16bit):
The sound is recorded using the 16-bit/48kHz sys-
tem (2 channels with a good sound quality).
When audio dubbing is performed, the sound that
was heard while you were shooting will be erased.
3
Select the sound to be recorded using the A DUB
INPUT item on the AV IN/OUT SETUP screen.
(P71)
MIC:
The sound of the built-in or external microphone is
recorded.
A_IN:
The sound of the audio component connected to
the AUDIO IN/OUT jack is recorded.
4
Find the scene where the sound is to be added,
and set the camera-recorder to the still-picture play-
back mode. (P45)
52
CAM
VCR
POWER
CH2
MIC
REAR
CH1 CH2
ZEBRA OIS
RESET
SHUTTER/IRIS
FOCUS USER 2
AUTO
MANUAL
VOL/JOG
WHITE BAL
SEARCH D.ZOOM SEARCH
MENU
STILL
USER 3
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP INDEX
5
Press the A.DUB button on the remote control unit
to establish the status ready for audio dubbing.
^Kar_
6
Press the PAUSE button (h) on the remote control
unit and start input of the sound to be dubbed.
^Kar_
7
When the PAUSE button (h) on the remote control
unit is pressed, the camera-recorder reurns to the
still-picture playback mode.
If more sound is to be dubbed, repeat steps
6
.
8
When the STOP button (g) on the remote control
unit is pressed, audio dubbing is stopped.
When the AUDIO DUB (sound adding) function is
allocated to a USER button on the camera-recorder,
audio dubbing can be performed (sound can be
added) by operating that button in the same way as
the PAUSE button (h) on the remote control unit.
• You cannot allocate functions to USER 3.
USER1 button
COUNTER RESET TITLE
ZOOM
MULTI/
P-IN-P REC A.DUB
/REW PLAY FF/ B
STILL ADV PAUSE STILL ADV
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP INDEX
5
and
ZOOM SPEED REC
H
OFF/M
L
COUNTER RESET
AUDIO IN
FRONT
CH1
MIC
AUDIO LEVEL
LINE SNS MODE CHK
CH2
MIC
REAR
CH1 CH2
ZEBRA OIS
RESET
SHUTTER/IRIS
FOCUS USER 2
AUTO
MANUAL
VOL/JOG
WHITE BAL
SEARCH D.ZOOM SEARCH
MENU
STILL
USER 3
USER2 button