Table of Contents
Advertisement
Search functions
Variable-speed search
This function enables you to change the playback
speed and search for specific scenes.
1
Press the q button on the camera-recorder or the
VAR SEARCH button on the remote control unit
while the tape is playing back.
"1×" appears on the viewfinder and LCD monitor,
and the tape is played back at the normal speed.
No sound is heard at this time.
2
Turn the multi dial.
When the multi dial is turned, the playback speed
changes in the sequence of 1/5× (or 1/3× in the LP
mode), 1×, 2×, 5×, 10× and 20× the normal tape
speed.
The tape is played back in the forward direction
when the dial is turned upward and in the reverse
direction when it is turned downward.
• Press the q button to return to normal playback.
46
If, in the VCR mode, you press the USER button (P68)
to which you have allocated the BLANK SEARCH func-
tion, the end of the last scene shot (a blank part of the
tape) is found, and a still picture of the frame that is
about a second ahead of the end of the last scene is
displayed.
• If there are no unrecorded blanks, the tape will stop
at the end of the tape.
• If shooting is started immediately after an unrecorded
INDEX
STOP
INDEX
blank has been found, the scene will be recorded
SELECT
VAR.
PB.
SEARCH
ZOOM
with frame-to-frame continuity following on from the
STORE
MENU
last frame.
SET
OFF/ON
ITEM
• You cannot allocate functions to USER 3.
P.B.DIGITAL
Advertisement
Table of Contents
