Chuango AWV Plus User Manual page 10

Step Two: Sign Up / In
Press the "Sign up" button on the page, and follow the instructions to create your
account first.
Once you have an account, select the "Sign in" button to enter the operation page.
Step Three: Connect the Hub to Your Router
Power on the Hub, then follow the configuration steps on App to set up your Hub
with your home WiFi. Once the connection is finished, the Hub will beep once, wait
until the WiFi indicator and the Status indicator stop blinking, you are ready to op-
erate your alarm system.
Important: AW1 Plus does not support WiFi of 5GHz band, If dual-band (5GHz and
2.4GHz) router is used, make sure to connect with the 2.4GHz WiFi instead of the
5GHz's. Make sure your smartphone is connected to the local WiFi network and
then follow the steps in the App to connect the AW1 Plus Hub to the router.
Note: If the connection was failed, please consult to FAQ in page 18 or contact our technical
support.
Step Four: Connect the Camera to Your Router
Power on the camera, tap on [+] Button and then follow the configuration steps on
App to set up your Camera with your home WiFi.
More details about the camera in this kit, please refer to "Help"on App.
7