Advertisement
The error messages appear in red color on the bottom line of the main screen.
Automatic warning messages
In case of incorrect parameter input or if a change in the current menu caused changes in some of the
parameters from a different menu, the controller displays warning messages. For example:
Parameter settings.
NPBC-V3C-B has two main groups of parameters with an option for a different access level to them:
User settings and Factory settings. Press the Menu button once to enter the User settings. They are
available for any user at any time. Press and hold the Menu button for more than 2 seconds to enter the
Factory settings. If the option for an access code has been activated, only users who know it can access
the Factory settings.
The controller has different types of menus. The examples below explain these types and the way to set
the parameters in each of them. Regardless the menu type, if no buttons are pressed for certain time,
the controller goes back to the previous screen or to the main screen. After adjusting the parameters
according to your needs, press the Menu button (
List choice – A red bar indicates the currently selected row. Press the up or down navigation
•
▲ or ▼)
buttons (
selection. An arrow pointing down at the bottom of the screen or up on the top of the screen
indicates that there are more options in the corresponding direction outside of the visible area
of the screen. In this case, press the corresponding navigation button to go to the next or the
previous page. If there is an arrow pointing right on any of the rows on the screen, there is a
sub-menu with list choice again. While looking at any screen with parameter settings, press the
left navigation button to go back to the previous screen with list choice.
User Manual / ver 3.7
Controller for pellet oven – NPBC-V3C-B
to move the bar and the right navigation button (►) to confirm the
http://www.naturela-bg.com/en/
) to save your settings.
page 15 of 30
Advertisement
