Step Twenty One: The panels have labels R and L on them to show you which
panels should be bolted together to prevent any confusion. Please assemble
them together per photo below.
Step Twenty Two: Both the left and right side lift panels have three bolt holes on
them. Take the matching side plate and secure to the outside of the panel.
(Photo shown is the inside of the panel) using (6) 1/4"*1/2" carriage bolts, (6)
1/4"*OD19*2t flat washers and (6) 1/4" hex nuts.
View of side panels
from inside out.
1.5HP Mobile Dust Cyclone Manual
24