Emptying The Drum; Routine Inspection - laguna CFLUX1 Manual

NOTE: You may have to gently bend the paddles in order to free the canister
filter. This should not adversely affect the operation of the machine.
5. With the canister filter removed use a compressed air gun to thoroughly
clean between the pleats, both inside and outside.
RE-ASSEMBLING THE CANISTER FILTER AFTER CLEANING
1. With the aid of another person, carefully re-insert the canister filter
repeating step 1,2,3 and 4 in reverse.
EMPTYING OR REPLACING THE FILTER BAG
Periodically check the filter bag, if it is more than one third full, it is
recommended that you empty it.
NOTE: If the filter bag gets too full, the weight may force it to pull away
from the band clamp, exposing the user to potentially harmful particulates.
1. Release the spring-loaded band clamp at the bottom of the filter and
remove the filter bag.
2. Empty or replace the filter bag and re-attach using the spring-loaded
band clamp.

EMPTYING THE DRUM

Periodically inspect the contents of the drum and empty as needed. To
inspect the contents of the drum:
1. Raise the drum foot peddle bar to lower the drum to the floor.
2. Roll it away from the machine, inspect and empty as needed.

ROUTINE INSPECTION

It is a good idea to routinely inspect any quality woodworking tool in order to
keep it in optimum condition. This includes inspecting all hardware for
tightness, ensuring the filter is clean, and cleaning debris and grime from any
surfaces and moving parts.
1.5HP Mobile Dust Cyclone Manual
33