Connecting To The Monitor Output Jacks; Av Connection To The Aerial Socket - Sanyo CA21FS2 Instruction Manual

Connecting other Equipment

Connecting to the Monitor Output Jacks

The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dubbing from AV1 or AV2 input terminals.
INPUT
/DVD
R
(MONO)
L
VIDEO
■ To record TV programme, select TV mode by
pressing the TV/AV Selector and record the
desired programme.

AV Connection to the Aerial Socket

The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme position that you want. (See Semi-Auto Tuning and Manual
Tuning on pages 10.)
ANT.75
Aerial Socket
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
16
Recording TV broadcasts or tape dubbing
MONITOR OUT
R
L
V
I
D
E
O
15
TV mode
PLAYBACK
To Audio Input (Left)
To Audio Input (Right)
To Video Input
■ To dub video from the AV1 terminal input, select
AV1 position by pressing the TV/AV Selector.
AV1
VCR for playback
VCR for
Recording