Connecting To The Front Av Input Jacks; Selecting The Colour System In Av Mode; Connecting To The Monitor Output Jacks - Sanyo CA21XS2 Instruction Manual

onnecting other Equipment
onnecting to the Front AV2 Input Jacks
t is convenient to use the AV2 input jack on the front panel for equipment that is often
connected and disconnected.
■ To watch the Front AV2 video input picture, select AV2
position by pressing the TV/AV Selector.
TV Game etc.
Selecting the olour System in AV mode
Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. n this case, press the RE ALL/ OLOUR SYSTEM button and select a suitable
colour system.
Each time the RE ALL/ OLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
AV1
PAL
AV1
NTS 4.43
AV1
Colour system setting for AV position is automatically stored in the memory.
onnecting to the Monitor Output Jacks
The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dubbing from AV1 or AV2 input terminals.
VCR for
Recording
■ To record TV programme, select TV mode
by pressing the TV/AV Selector and
record the desired programme.
■ To dub video from the AV1 terminal input, select
AV1 position by pressing the TV/AV Selector.
15
TV mode
AV1
5