Table of Contents
Advertisement
Connecting other Equipment
Connecting to the Monitor Output Jacks
The picture signal being displayed on the TV screen is output through the Monitor Output
Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV1 or AV2
input terminals.
MONITOR
AV1 INPUT
R
AUDIO
L
S-VIDEO
(MONO)
VIDEO
I To record TV programme, select TV mode
by pressing the TV/AV Selector and
record the desired programme.
AV Connection to the Aerial Socket
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme
position that you want. (See Semi-Auto
Tuning and Manual Tuning on page 13.)
For further details concerning this connection and adjustment, refer to the
operating instructions for the AV equipment.
20
Recording TV broadcasts or tape dubbing
OUT
15
TV mode
To video and audio inputs
I To dub video from the AV1 terminal input, select
AV1 position by pressing the TV/AV Selector.
ANT. 75Ω
Aerial Socket
VCR for recording
AV1
PLAYBACK
VCR for playback
Advertisement
Table of Contents
