Connecting To The Front Av2 Input Jacks; Selecting The Colour System In Av Mode; Connecting To The Monitor Output Jacks - Sanyo CA21XS2 Instruction Manual

Connecting to the Front AV2 Input Jacks

It is convenient to use the AV2 input jack on the front panel for equipment that is often
connected and disconnected.
To watch the Front AV2 video input picture, select AV2
position by pressing the TV/AV Selector.
AV2 IN
VIDEO L-AUDIO-R

Selecting the Colour System in AV mode

Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
Colour system setting for AV position is automatically stored in the memory.

Connecting to the Monitor Output Jacks

The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dubbing from AV1 or AV2 input terminals.
INPUT
AV1/DVD
C R
R
(MONO)
C L
B
Y
VIDEO
To record TV programme, select TV mode
by pressing the TV/AV Selector and
record the desired programme.
TV
PLAYBACK
AV1
PAL
Recording TV broadcasts or tape dubbing
MONITOR OUT
R
L
V
I
D
E
O
15
TV mode
Connecting other Equipment
To video and
audio outputs
(Stereo)
AV1
NTSC4.43
To Audio Input (Right)
To Audio Input (Left)
To Video Input
To dub video from the AV1 terminal input, select
AV1 position by pressing the TV/AV Selector.
Video Camera,
TV Game etc.
AV1
NTSC
VCR for
Recording
AV1
15