Connection To The Front Av2 Input Jacks; Connecting To The Monitor Output Jacks; Av Connection To The Aerial Socket - Sanyo CA14SE1(V) Instruction Manual

Connecting Other Equipment
Connecting Other Equipment
Connecting to the Front AV2 Input Jacks

Connecting to the Monitor Output Jacks

INPUT
AV1/DVD
C R
R
(MONO)
C L
B
Y
VIDEO
To video and
audio inputs
VCR for Recording

AV Connection To the Aerial Socket

The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and
Manual Tuning on pages 11.)
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
16
Note: For monaural model TV there is no L/R audio input terminals. If the
video player is stereo, connect the Left (L) audio output terminal from
video player to audio input terminal on the monaural TV set (more details
see your video player manual book).
It is convenient to use the AV input jack on the front panel for equipment
that is often connected and disconnected.
Video/DVD Player
MONITOR OUT
R
To Audio Output-R
L
To Audio Output-L
V
I
D
To Video Output
E
O
To watch the Front AV2 video
input picture, select AV2
position by pressing the TV/AV
Selector.
The picture signal being displayed on the TV screen is
output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dub-
bing from AV1 or AV2 input terminals.
To record TV programme, select TV mode by
pressing the TV/AV Selector and record the
desired programme.
To dub video from the AV1 terminal input, select
AV1 position and by pressing the TV/AV Selector.
Aerial Socket
15
TV mode
AV1
PLAYBACK
VCR for
playback
AV2