Selecting The Colour System In Av Mode; S-Vhs Vcr/Dvd Player Connection - Sanyo CA21FS2 Instruction Manual

Connecting other Equipment
■ When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1.
Whenever the TV/AV button is pressed, the mode will change as follows:
28
TV mode
■ You can select a TV programme while watching a playback from a VCR
For example:
● To select programme position "9" while watching a playback from external VCR, press "9" button of the
remote control. The TV set returns to the TV mode and programme "9" will be selected.
● To select the programme position "26", press Digit (--/-) button, "2" then "6" button. Then TV set returns
to the TV mode and programme position "26" will be selected.
Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will
return the TV to the TV mode.

Selecting the Colour System in AV Mode

Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
Colour system setting for AV position is automatically stored in the memory.
S-VHS VCR / DVD Player Connection
C
R
S-WOOFER
C
B
Y
VIDEO
S-VIDEO
■ To watch a S-VHS video, select AV1 position by pressing the TV/AV Selector.
Note: S-VIDEO terminal takes priority over AV1 input. While a S-VIDEO terminal is connected, the AV1
terminal for normal VCR input can not be used. To use the AV1 terminal for normal VCR input,
disconnect the S-VIDEO terminal.
14
AV1
AV1
PAL
R R
(MONO)
L L
V
I
D
E
O
Connect it to the S-VIDEO terminal, you will enjoy
high quality picture from the DVD player.
S-VIDEO cord
AV1(DVD)
(This AV1(DVD) will be
displayed for model with
DVD Component input.)
AV1
NTSC
NTSC4.43
(for model with S-VIDEO input)
PLAY
AV2
AV1
VCR
AV1